Graco 3A1315A Instrukcja Użytkownika Strona 1

Instructions-Parts3A1315A24G621 Agitator Speed ControllerAccessoryENGAccessory kit to control and automatically maintain the speed of an air-powered a

Technical DataMaximum air supply pressure100 psi (0.7 MPa, 7 bar)Minimum air supply pressure70 psi (0.5 MPa, 4.9 bar)Maximum speed 1000 rpmMaximum spe

Notes3A1315A11

Graco Standard WarrantyGraco warrants all equipment referenced in this document which is manufactured by Graco and bearing itsname to be free from def

ContentsInstallation... 3Operation... 5

InstallationThe agitator speed controller fits the following Gracopneumatic rotary motors:Motor Part No.10114016A871101388111310NOTE: Before installing

4. Using the allen wrench (25) and multi-functionwrench (26), tighten the compression nut (24)onto the flange connector at least 1/8 turn pastfinger tig

OperationConnect the main air line to the quick disconnectfitting (28) on the agitator speed controller. Do notexceed the maximum air inlet pressure of

TroubleshootingProblemSolutionThe speed controller does not adjust for a change inload, or shuts off before the knob (16) is turned allthe way down.Re

RepairNOTE: To repair the agitator, see your separateagitator manual.NOTE: Repair Kit 24J886 is available. Order the kitseparately. Kit parts are mark

Kit PartsThe kit contains all necessary parts and tools toinstall the agitator speed controller.Ref.No.DescriptionQty1HOUSING, lower, speed controller

ti17005a3A1315A 9